Quick-Install Guide
Serial No.
Date Installed
Installed By
If you have any questions regarding this installation, call your
local Waters office. In the U.S. call 1-800-252-HPLC.
The quality management system of Waters' chromatography
applications software design and manufacturing facility,
Milford, Massachusetts, complies with the International
Standard ISO 9001 Quality Management and Quality
Assurance Standards. Waters' quality management system is
periodically audited by the registering body to ensure
compliance.
Waters
®
2465
Electrochemical Detector
Waters and Connections are registered
trademarks of Waters Corporation.
Printed in U.S.A. May, 2004
715000483 Rev. B
Waters Corporation
34 Maple Street
Milford, MA 01757
508 478-2000
http://www.waters.com
Waters
3
Power Up
After completing the electrical
and fluidic connections, power up
the unit using the switch on the
rear panel. The screens at the left
appear.
CAUTION
To prevent substantial damage to
the working electrode or the
electronics, never power-on the
flow cell when:
• the cell cable is not properly
connected,
• the flow cell is not filled with
buffer, or,
• the outside of the flow cell is
wet.
Refer to the
2465
Electrochemical Detector
Operator's Guide
for more
information on startup
procedures.
Flow Cell Type
Reference Electrode
Working Electrode
FIRST DISPLAY
ON POWER UP
CHECKING MEMORY OK
CHECKSUM OK
SECOND DISPLAY
ON POWER UP
WATERS 2465 EC DETECTOR
MAIN
DIAG
SCAN
PULSE
DC
CONFIG
firmware version 2.00
FINAL DISPLAY
ON POWER UP
INSTRUMENT READY
Electrochemical Detector
2465
Waters
CHECKING MEMORY . . . . .
CHECKSUM . . . .