Creo Color Controller C-80, Technical Manual

Page: 45 / 150

29
2. Exit the Color Controller C-80 software. If you made any changes to the
configuration, these changes will only take effect if the Color Controller C-80 is
shut down and then restarted.
3. Quit any other software that may be running and, from the Windows Start
menu, select Shut Down > Restart > OK .
After restarting, the Color Controller C-80 software splash screen appears.
4. The Color Controller C-80 software is automatically loaded and launched.
A backup of the operating system should be performed after the system
configuration is completed, see
Backing Up the System Partition on page 42.
2.3 Configuring McAfee VirusScan
For best results, install McAfee VirusScan® software on your Color Controller C-80.
After you have installed McAfee VirusScan software, perform the following
configuration procedures.
Once a year, the site manager must obtain the latest version of the antivirus
software and installation procedure. The site manager must also regularly download
the latest antivirus definitions from the relevant Internet site.
2.3.1 Configuring the Scan All Fixed Disks Settings
1. From the taskbar, right-click the VShield icon and select VirusScan Console .
2. In the Task column, right-click Scan All Fixed Disks and select Properties .
3. Click the Detection tab.
Note: Make sure to turn off your printer before you restart the Color Controller
C-80. After the Color Controller C-80 restarts and the Color Controller C-80
workspace appears, you can turn on the printer.
Important:
Running VirusScan software could slow down process time
and affect the overall performance of the server.
Note: The following VirusScan software configuration procedure is subject to
change without notice, and the relevant documentation may not be updated.