Creo Color Controller C-80, Technical Manual

Page: 26 / 150

10 Chapter 2—First Time Setup and Configuration
2.1.2 External LEDs and Controls
Figure 4 shows the external LEDs and controls of your Color Controller C-80.
Figure 4: Front door controls and indicators
2.1.3 Turning On the Color Controller C-80
Before connecting the Color Controller C-80 to an AC power source, review Safety
Information (Multi-Language) on page v.
To turn on the Color Controller C-80:
1. Connect the monitor’s AC power cable to the AC mains supply and turn on the
monitor.
2. Connect the server’s AC power cable to the AC mains supply.
3. Wait 20 seconds before pressing the power control button on the Color
Controller C-80 (see Figure 4 on page 10). The ON/OFF LED on the front panel
illuminates a steady green.
After the system startup is complete, the Windows desktop appears.
Power-on LED (green)
Disk activity LED (orange)
USB ports
Network activity LED (green)
Not in use
Network activity LED (green)
Front door open
Power control button
Reset button
Not in use
DVD-RW drive
Power control button Turns the Color Controller C-80 on or off
Power-on LED Illuminates steady green when the Color
Controller C-80 is turned on
Reset button Restarts the Color Controller C-80
Disk activity (hard disk)
LED Blinks orange when a hard disk drive is in use
Network activity LED Blinks green when the network is in use
Front door closed