Creo Color Controller C-80, Technical Manual

Page: 35 / 150

19
To change the operator password:
1. In the Passwords area, clear Auto log on check box.
2. In the Passwords area, under Operator, in the Enter old password box, type
the default password (colorserver).
3. In the Enter new password box, type a new password.
4. In the Verify new password box, retype the new password to confirm it, and
click Apply .
To restrict guest access:
 In the Passwords area, under Guest, select the Disable guest connection
check box.
Using Default Disk Wipe Setting
The Disk Wipe utility enables you to work in a more secure environment, by
permanently removing data left by files that you have deleted. The utility eliminates
the contents of your deleted files by scanning all of the empty sectors on both the
system and image disks, and replacing them with zeros. Non-empty sectors are left
untouched. The Disk Wipe utility starts automatically every time you quit the
Color
Controller C-80
software.
 In the Disk Wipe area, do one of the following:

To enable the Disk Wipe utility, select the Wipe disk on system shutdown
check box.

To disable the Disk Wipe utility, clear the Wipe disk on system shutdown
check box.