Creo Color Controller C-80 Technical Manual Download Page 138

Page: 138 / 150

122

Chapter 5—Hardware and Maintenance Repairs

7. Gently move the power supply out of the server.

Figure 43: Removing the power supply unit

5.9.2 Installing the Power Supply

1. Orient the power supply and place it into the server.

2. Insert the power supply into the opening at the rear of the chassis.

3. Align the holes in the power supply with the holes in the chassis.

4. Insert the four power-supply screws, and tighten them.

5. Reconnect the internal cables from the power supply to the system board and

drives.

6. Return the side cover. See

Placing the Side Cover

on page 95.

7. Reconnect all external cables and AC power cords, and turn on the server.

Summary of Contents for Color Controller C-80























































































































































Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands

Creo Color Controller C-80, Technical Manual

Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands