Creo Color Controller C-80 Technical Manual Download Page 110

Page: 110 / 150

Chapter 5—Hardware and Maintenance Repairs

5.3.2 Hardware Connections

Figure 8 shows the hardware connections for the Color Controller C-80.

Figure 8: Hardware connections for the Color Controller C-80

5.4

Removing and Placing the Side Cover and Front

Panel

This section describes the procedures used to remove and place the
Color Controller C-80 cover and front panel.

5.4.1 Removing the Side Cover

1. Turn off the Color Controller C-80 and all peripheral devices. Disconnect all

external cables and power cords.

2. If necessary, unlock the side cover.

3. Loosen the two screws that secure the side cover to the rear of the server.

4. Release the side cover by sliding it toward the rear of the server.

Summary of Contents for Color Controller C-80























































































































































Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands

Creo Color Controller C-80, Technical Manual

Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands