Creo Color Controller C-80, Technical Manual

Page: 96 / 150

80 Chapter 4—Diagnostics and Troubleshooting
5. Close the Computer Management window.
6. When the
Image Disks File System is not Formatted
message
appears, click OK .
Striping Unknown Disks
The following procedures describe how to initialize unknown disks to basic disks,
and to convert basic disks to dynamic disks.
Perform the following procedures if you have replaced an image disk.
To initialize the disks:
1. In the Computer Management window, right-click the disk you want to initialize,
and select Initialize Disk .
2. Verify that the image disk check boxes are selected, and click OK .