Creo Color Controller C-80, Technical Manual

Page: 58 / 150

42 Chapter 3—Reinstalling the Color Controller C-80 Software
3.3 Backing Up the System Partition
Back up the Color Controller C-80 system partition so that you always have a
working copy of your software to be able to restore your system, if necessary. It is
best practice to back up the system partition each time you update the Color
Controller C-80 software, update the system cofiguration, perform a complete
installation, or update the operating system.
Note: Jobs located in the queues and the Storage area are not backed up.
Note: If you are already logged onto your system and the Color Controller C-80 workspace
is open, exit the workspace, insert DVD 1 into the DVD-RW drive, and proceed to step 3
1. Turn on your Color Controller C-80.
2. Place DVD 1 (Windows XP Fast Install) into the DVD-RW drive.
3. Restart the Color Controller C-80.
4. Wait until the Color Server Startup Menu appears.
The following options are available:
5. Press 3 to use the System Backup Tool.
6. Type Y to confirm your selection.
The System Backup/Restore Tool menu appears.
Attention: Before performing the backup and restore procedures, make sure that
your computer’s configuration is the one that you want to use when restoring the
system.
Tip: It is recommended that you delete unnecessary files, such as temporary
files, and all jobs in the workspace before performing the backup procedure.
1. Complete Installation, deleting old jobs
2. Preservation Installation (System Partition Overwrite)
3. System Backup/Restore Tool
4. Exit
System Backup / Restore Tool
Caution!!!
It is strongly recommended that you back up/restore both the C and D
partitions at the same time to prevent possible synchronization problems
between these partitions.
1. Back up system partition C to partition D
2. Restore system partition C from partition D
3. Back up partitions C and D to a DVD media
4. Restore partitions C and D from the DVD media
5. Exit and return to Main menu
Select an operation [1,2,3,4,5]?
Tip:
If you want to copy the files to an external device, copy only the files
located on
D:\Backup
that begin with
SYSPART
.