Creo Color Controller C-80 Technical Manual Download Page 102

Page: 102 / 150

Chapter 4—Diagnostics and Troubleshooting

1. Close the Computer Management window.

When the

Image Disks File System is not Formatted

message appears,

click

4.4.13 Formatting the Image Disk

Perform the following procedure when suggested as a recovery action.

1. Close all software programs and wait for them to shut down completely.

2. From the Windows

Start

menu, select

Color Controller C-80 > Color Controller

C-80 Tools > Format Image Disks

3. Close all open windows, if required, and click

4. Click

Important:

Formatting erases all data stored in the Storage area. It is

recommended to back up your data, if possible, to an external device or
network.

Summary of Contents for Color Controller C-80























































































































































Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands

Creo Color Controller C-80, Technical Manual

Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands