Creo Color Controller C-80, Technical Manual

Page: 60 / 150

44 Chapter 3—Reinstalling the Color Controller C-80 Software
d. When a confirmation message appears notifying you that the backup
process was successfully completed, remove the DVD from the DVD-RW
drive and press any key to continue.
The Color Controller C-80 restarts automatically.
3.4 Restoring the System Partition
The Color Controller C-80 enables you to restore partition C or the entire system
(partitions C and D ). Restore the software on your Color Controller C-80 after an
unrecoverable disk crash, or when the system exhibits unpredictable behavior—for
example, error messages suddenly appear or occasional the user interface freezes.
The process takes 20 - 30 minutes, depending on the size of the partition.
Performing the restore procedure requires a previous backup.
1. Exit the Color Controller C-80 work space.
2. Insert DVD 1 (Windows XP operating system) into the DVD-RW drive.
3. From the Windows Start menu, select Shut Down > Restart > OK .
After the system restarts, the Color Controller C-80 Startup Menu appears. The
following options are available:
4. Press 3 to use the System Backup/Restore Tool .
5. Press Y to confirm your selection.
6. To restore only partition C , press 2. This option restores partition C from the
image file on partition D .
Important:
Always disconnect the network cable before installing
software.
1. Complete Overwrite Installation, deleting old jobs
2. Preservation Installation (System Partition Overwrite)
3. System Backup/Restore Tool
4. Exit
System Backup / Restore Tool
Caution!!!
It is strongly recommended that you back up/restore both the C and D
partitions at the same time to prevent possible synchronization problems
between these partitions.
1. Back up system partition C to partition D
2. Restore system partition C from partition D
3. Back up partitions C and D to a DVD media
4. Restore partitions C and D from the DVD media
5. Exit and return to Main menu
Select an operation [1,2,3,4,5]?
Note: Before restoring the color server system partition, you may need to
return the ghost file or files that you moved to an external device to
D:\Backup
.