Creo Color Controller C-80 Technical Manual Download Page 141

Page: 141 / 150

125

4. Disconnect the fan cable from the system board connector (Fan 4).

5. Press the two locking tabs, protruding through the outside of the rear of the

server, outward.

6. Lift the fan upward and out of the server.

7. Remove the fan bracket and retain for future use.

5.10.4 Installing the PCI Fan

1. Place the fan bracket on the new PCI fan.

2. Place the PCI fan in position in the front of the server.

3. Guide the two locking tabs through the top of the slots.

4. Press the fan bracket against the rear of the server, until all the tabs are in their

slots, then move the fan bracket downward until it locks into position.

5. Reconnect the fan cable to the system board.

6. Return the side cover. See

Placing the Side Cover

on page 95.

7. Reconnect all external cables and AC power cords, and turn on the server.

Summary of Contents for Color Controller C-80























































































































































Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands

Creo Color Controller C-80, Technical Manual

Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands