Creo Color Controller C-80, Technical Manual

Page: 43 / 150

27
If the JDF job has a target path specified in the job, JDF output is always created.
For JDF jobs that do not have a specified target path, the JDF output is only created
if this option is selected in the Configuration Wizard.
1. In the JDF outputs area, select the Create JDF outputs check box, and select
one of the following options:
•
Select All jobs to create JDF reports for all jobs.
•
Select Only source JDF jobs to create JDF reports from only source JDF
jobs.
2. In the Target path box, type the target path or click Browse to locate the
directory for the JDF output.
3. In the JMF signals for job status area, select the Send JMF signals check box
to receive JMF signals about the job’s status.
4. In the HTTP URL box, type HTTP URL . This enables you to submit JMF signals
with the job status each time that the job status of a job in the system changes.
2.2.15 Configuring General Defaults
Default Image Size
When a PDL file does not contain page size information, the RIP uses a predefined
default size. This default size is defined according to the unit of measurement that
you have selected during the first-time configuration.

In the Default Image Size area, select the desired size.
OPI Support
OPI Support automatically creates a low-resolution image of all supported file
formats for placement in any layout application. It replaces layout images on-the-fly
with optimized high-resolution images during output.