Creo Color Controller C-80, Technical Manual

Page: 68 / 150

52 Chapter 4—Diagnostics and Troubleshooting
Selecting From the Phoenix cME FirstBIOS Pro Setup Utility
Advanced Menu
Boot Features—Select this submenu to change the following settings:
 Quick Boot Mode:
If enabled, this feature will speed up the POST (power-on self test) routine
after the computer is turned on. If disabled, the POST routine will run at
normal speed.

Quiet Boot:
Select this option to enable or disable the diagnostic screen during startup.
•
Advanced Processor Options:
Select this submenu to change the following settings.

CPU Speed :
This display indicates the speed of the processor.

Machine Checking :
If enabled, this feature allows the CPU to detect and report hardware
(machine) errors.

Compatible FPU Code :
This feature is for debugging only.

Adjacent Cache Line Prefetch :
If enabled, the CPU fetches both cache lines for 128 bytes.

Set Max Ext CPUID = 3

Echo TPR :
This feature is for debugging only.

C1 Enhanced Mode :
If enabled, this feature lowers the CPU voltage and frequency to prevent
overheating.

Intel Virtualization Technology :
If enabled, this feature utilizes enhanced virtualization capabilities to allow
one platform to run multiple operating systems and applications in
independent partitions, creating multiple virtual systems in one physical
computer.
Disabled is the default setting. If you change this setting, you must restart
your computer for the change to take effect.

No Execute Mode Memory Protection :
If enabled, this feature allows the processor to classify areas in the memory
where an application code can execute and where it cannot.

Enhanced Intel Speed Step :
This setting allows you to determine the processor power management
mode.
•
I/O Device Configuration:
Select this submenu to change the following settings:

KBC Clock Input : This setting allows you to set the keyboard clock rate.

Serial Port A : This setting allows you to assign control of serial port A.

Serial Port B : This setting allows you to assign control of serial port B.