Creo Color Controller C-80, Technical Manual

Page: 135 / 150

119
5.7.2 Installing the DVD-RW Drive
1. Install the tab strips to the new DVD-RW drive that you removed from the old
DVD-RW drive. See Figure 40.
2. Slide the DVD-RW drive into the DVD-RW drive cage, making sure that the
drive locks into place.
3. Reconnect the cables to the DVD-RW drive.
4. Return the side cover. See Placing the Side Cover on page 95.
5. Reconnect all external cables and power cords, and turn on the server.
5.8 Replacing a Hard Disk
The tasks that you must perform before and after you remove a hard disk and install
a new one differ for the system disk and image disks. The tables in this section
describe the procedure for each case, and tell you where to find the information.
Table 3: Tasks to replace system disk
Table 4: Tasks to replace image disk
Step Section in this book
1. Back up the system configuration
(Preferences window)
See Color Controller C-80, Powered
by Creo Color Server Technology,
for Pro C900 User Guide (731-
01699A-EN
2. Replace the disk page 119
3. Reinstall DVD 1 and DVD 2 on
the Color Controller C-80
page 39
4. Restore the system configuration
(Preferences window)
See Color Controller C-80, Powered
by Creo Color Server Technology,
for Pro C900 User Guide (731-
01699A-EN
Step Section in this book
1. Replace the disk page 119
2. Perform disk striping page 77
3. Format the image disk page 86
Attention:
System disk: Before replacing or formatting the system disk, ensure that you have
made a note of the computer name, TCP/IP information (for example DHCP =
Yes), and OEM Windows XP Professional Product ID#. Back up folders or jobs in
C
and
D
partitions to an external device or network.
Image disks: Before replacing an image disk, ensure that you back up all jobs
(such as: PostScript, High-Res, Variable Print Specification, and PDF jobs) to
an external device or network.