Creo Color Controller C-80 Technical Manual Download Page 25

Page: 25 / 150

8. Shut down the Color Controller C-80.

9. Locate the printer interface cable (crossover Ethernet cable) that was shipped

with the Color Controller C-80 and connect one end of the cable to the printer
interface port on the Color Controller C-80, and then connect the other end of the
cable to the correct Ethernet port on the printer.

Figure 3: Printer and Color Controller C-80 connection

Note:

To prevent the risk of crosstalk, make sure the printer interface cable does not

touch the system’s power cables. The Color Controller C-80 could shut down or image
quality problems could result.

10. Open the

Color Controller C-80 front panel and press the power control button.

Wait approximately two minutes for the

Color Controller C-80

to reach the idle state

and for the workspace to appear.

11. Turn on the printer using the main power switch.

Summary of Contents for Color Controller C-80























































































































































Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands

Creo Color Controller C-80, Technical Manual

Search results

Summary of Contents for Color Controller C-80

Reviews:

Related manuals for Color Controller C-80

Brands by name

Popular brands