Creo Color Controller C-80, Technical Manual

Page: 111 / 150

95
5. Move the side cover outward and away from the server.
Figure 9: Removing the side cover
5.4.2 Placing the Side Cover
1. Verify that the server is off and that all external cables are disconnected.
2. Clear any cables that might impede returning the side cover.
3. With the server in the upright position, rest the bottom of the side cover on the
bottom rail of the chassis.
4. Align the slots in the side cover with the matching tabs in the chassis. Insert the
side cover into the slots.
5. Slide the side cover toward the front of the server.
6. Tighten the two screws that secure the side cover to the rear of the server.
7. Reconnect all external cables and power cords and turn on the server.
Loosen the two screws
Pull handle to release cover,
and slide out of chassis
Caution:
For proper cooling and airflow, replace the side cover before
turning on the server. Operating the server for extended periods (more than
30 minutes) with the side cover removed might damage server components.