Creo Color Controller C-80, Technical Manual

Page: 134 / 150

118 Chapter 5—Hardware and Maintenance Repairs
5.7 Replacing the DVD-RW Drive
Perform the following procedures to remove and install the DVD-RW drive.
Figure 39: Bay1 DVD-RW drive
5.7.1 Removing the DVD-RW Drive
1. Review Safety Information (Multi-Language) on page v.
2. Turn off the Color Controller C-80 and peripheral devices. Disconnect all power
cords and external cables.
3. Remove the side cover. See Removing and Placing the Side Cover and Front
Panel on page 94.
4. Disconnect the cables connected to the DVD-RW.
5. Press the retaining tabs that hold the DVD-RW drive, then gently slide the drive
toward the front of the server and remove the drive.
6. Remove the tab strips from both sides of the DVD-RW drive using a cross-head
screwdriver and retain them for future use.
Figure 40: Tab strips on the DVD-RW drive
Retaining tab (on
each side)
Tab strip (one on each side)