Configuring the Cisco SPA 500S Attendant Console
Setting Up the Cisco SPA 500S Attendant Console
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
188
9
Assigning Cisco SPA 500S LEDs to Phone Extensions
By default, all 32 keys on the Cisco SPA 500S are assigned to the first
extension on the IP phone (extension 101 based on the default multicast
autoconfiguration).
To limit the number of LEDs assigned to the first extension, use the vid=1
keyword. Then use the vid=2 keyword to assign the next set of keys to the
second extension. The numeric values correspond to the default extensions on
the phone as follows:
•
vid=1—extension 101
•
vid=2—extension 102
•
vid=3—extension 103
•
vid=4—extension 104
•
vid=5—extension 105
•
vid=6—extension 106
Cisco SPA 9000 Syntax
Find more complete information in the
Cisco SPA 9000 Voice System Installation
and Configuration Guide
.
The following entry enables speed dialing, BLF monitoring, and call pick up on a
Cisco SPA 9000 server with:
•
IP address 192.168.1.101
•
station name phone1
•
extension 101
•
Cisco SPA 500S unit/key using the phone’s extension 2
Example:
fnc=sd+blf+cp;sub=phone1@$PROXY;usr=101@$PROXY;nme=phone1;vid=2
