Getting Started
Viewing Phone Information
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
17
1
Viewing Phone Information
After you log on to the web UI (see
“Using the Web Administration User
Interface” section on page 11
), you can check the current status of the Cisco
SPA 500 Series or Wireless-G IP Phone by clicking the Info tab. The Info tab shows
information about all phone extensions, including phone statistics and the
registration status. All fields are read-only.
See
“Info Tab” section on page 197
for more information about the fields.
Using IVR on the Cisco SPA 501G IP Phone
The Cisco SPA 501G provides an IVR menu to perform configuration tasks and
obtain information about the phone.
To access the IVR menu, press the Settings button. Enter the number of the option
and press #. Some menus require entering of further information or numbers.
You have the following options:
Number
Option
100
Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled.
110
Recites the IP address of the phone.
120
Recites the netmask of the phone.
130
Recites the gateway address.
140
Recites the MAC (hardware) address of the phone.
150
Recites the phone software version.
160
Recites the primary DNS server address.
170
Recites the HTTP port on which the web server listens. Defaults to 80.
180
Recites the IP multicast address (used by the Cisco SPA 9000 to
communicate with the IP phone).
220
Recites the method of call control (SIP or SPCP).
