Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
48
3
STEP 4
Under Supplementary Services, in the Auto Answer Page field, choose yes.
STEP 5
Click Submit All Changes. The phone reboots.
Configuring Paging Groups
You can configure a phone as part of a paging group. Users can then direct pages
to specific groups of phones.
Limitations:
•
A phone can be a listening member of no more than two paging groups.
•
No more than five paging groups can be configured on a phone.
To configure a phone as part of a paging group:
STEP 1
Log in to the web administration interface for the phone.
STEP 2
Click Admin Login and advanced.
STEP 3
Click the Phone tab.
STEP 4
Under Multiple Paging Group Parameters, enter the paging commands into the
Group Paging Script field. The syntax is as follows:
pggrp=ip-address:port;[name=xxx;]num=xxx;[listen={yes|no}]];
Where:
•
IP address: Multicast IP address of the phone that will listen for and receive
pages.
•
port: Port on which to page; you must use different ports for each paging
group. All phones in the same paging group must use the same port
number.
•
name (optional): The name of the paging group.
•
num: The number users will dial to access the paging group; must be unique
to the group.
•
listen: If the phone being configured is a listening member of the page
group. A phone can be a listening member of a maximum of two groups. If
no value is entered, the default is to not listen as a member of this group.
