Cisco Small Business Pro SPA 502G Administration Manual Download Page 75

Page: 75 / 300

Customizing Cisco SPA and Wireless IP Phones

Configuring Phone Features

Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

•

Try a value that is loud enough without producing echo (an issue if the input
gain is too high).

STEP 5

Click Submit All Changes.

Enabling Wireless (Cisco SPA 525G only)

The Cisco SPA 525G provides a built-in Wireless-G interface. To enable wireless:

STEP 1

STEP 2

Click Admin Login and advanced.

STEP 3

Click the System tab.

STEP 4

Under Wi-Fi Settings, in the SPA525-wifi-on field, choose yes.

STEP 5

Click Submit All Changes.

Enabling Bluetooth (Cisco SPA 525G only)

The Cisco SPA 525G supports Bluetooth to allow use of the phone with a wireless
Bluetooth-enabled headset. To enable Bluetooth:

STEP 1

STEP 2

Click Admin Login and advanced.

STEP 3

Click the System tab.

STEP 4

Under Bluetooth Settings, in the Enable BT field, choose yes.

STEP 5

Click Submit All Changes.

Summary of Contents for Small Business Pro SPA 502G













































































































































































































































































































Search results

Summary of Contents for Small Business Pro SPA 502G

Reviews:

Related manuals for Small Business Pro SPA 502G

Brands by name

Popular brands

Cisco Small Business Pro SPA 502G, Administration Manual

Search results

Summary of Contents for Small Business Pro SPA 502G

Reviews:

Related manuals for Small Business Pro SPA 502G

Brands by name

Popular brands