Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 869 / 987

SORTER (Service mode for delivery options)
ADJUST (Adjustment mode)
SORTER (Service mode for delivery options) > ADJUST (Adjustment mode)
ST-ALG1 1 Adjustment of alignment position
Detail To adjust the alignment position.
As the value is incremented by 1, the travel length of the Alignment Plate is increased by 0.25 mm.
Use Case - When misalignment occurs
- When adjusting the alignment position according to paper width and degree of paper curl
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Caution Be sure to make an adjustment according to the paper width the user uses and degree of curl.
Display/Adj/Set Range -20 to 20
Unit mm
Default Value 0
Amount of Change per
Unit
0.25
OPTION (Specification setting mode)
SORTER (Service mode for delivery options) > OPTION (Specification setting mode)
MD-SPRTN 1 Set restriction at Finisher error
Detail To set whether to stop the machine when an error occurs at Finisher.
Use Case
When preferring to run the machine at Finisher error
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
When "1" is set, staple operation or alignment operation is not executed. Set "0" normally.
Display/Adj/Set Range
0 to 1
0: Normal, 1: Function restriction
Default Value 0
8. Service Mode
858