Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 125 / 987

Function Settings > Receive/Forward
• Fax Settings >Select RX Mode > Fax/Tel (Auto Switch) (*1)
• Fax Settings > Remote RX > ON (*1)
• Fax Settings > Set Number Display > ON (*1)
Function Settings > Send
• Fax Settings > Modem Dial-in Settings > ON (*1)
Other Settings
• Volume Settings key > Fax Volume Settings > Incoming Fax Ring > ON (*1)
*1: This may not be displayed depending on the country, model, and configuration of the options.
*2: This must be already registered on Google Cloud Print in advance.
Hardware status
• It is connected to the coin vendor.
System Performance Status
• The system is running/communicating.
CAUTION:
The system is in a running/communicating state for approx. 10 minutes after startup in many cases.
Quick Startup
To realize faster startup, power configuration has been changed to always supply power to the Main Controller PCB at quick
startup. Consequently, the main menu can be displayed faster than the normal startup.
Even when the Main Power Supply Switch is OFF, power is supplied to the following PCBs:
Quick startup setting ON Quick startup setting OFF
Low-voltage Power Supply PCB Power is supplied Power is supplied
All-night Power Supply PCB Power is supplied Power is supplied
Main Controller PCB Power is supplied OFF
NOTE:
The quick startup function can be set from "Settings/Registration".
• Settings/Registration > Preferences > Timer/Energy Settings > Quick Startup Settings for Main Power
[On]: Quick startup is executed (default)
[Off]: Quick startup is not executed
Disconnect the power plug when performing work with the possibility to come in contact with the PCBs above. If a conductive
material comes in contact with the PCB, short circuit may occur in the PCB, and may cause damage on it.
The following label is used at the place where attention is required.
Quick Start
Plug Off
Conditions for not executing quick startup
This machine does not execute quick startup if the following conditions are met at first startup after the power plug is connected
to the outlet.
Connection status of the hardware
• A coin vendor is connected.
2. Technology
114