Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 727 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
IMGCNTPR 1 Setting of image quality mode
Detail To set the image quality mode.
When 0 is set, "image quality priority" mode is applied. When 1 is set, "counter priority" mode is
applied. When 2 is set, "counter priority (image quality priority for image only)" mode is applied.
Use Case Upon user's request
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 2
0: Image quality priority mode, 1: Counter priority mode, 2: Counter priority mode (image quality
priority for image only)
Default Value 1
CDS-FIRM 1 Set to allow firmware update by admin
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware by user (administrator).
When "1: Enabled" is set, Updater can be activated from the user mode.
Use Case
When allowing the administrator to update the firmware
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Do not use it for purposes other than collecting log files. In Japan, the firmware cannot be updated
by user. Be sure to return the value to 0 after use.
Display/Adj/Set Range
0 to 1
0: Disabled, 1: Enabled
Default Value
It differs according to the location.
Supplement/Memo CDS: Content Delivery System
CDS-MEAP 1 Set to allow MEAP installation by admin
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to install MEAP applications and enable iR options
from CDS.
When 1 is set, Updater can be activated from Settings/Registration menu.
Use Case When allowing the administrator to install MEAP applications and enable iR options from CDS
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Disabled, 1: Enabled
Default Value 1
Supplement/Memo CDS: Content Delivery System
CDS-UGW 1 Set to allow firmware update from UGW
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware from the UGW server.
When "1: Enabled" is set, Updater accepts the operation from the UGW server in cooperation with
CDS.
Use Case
When allowing update of the firmware from the UGW server
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Disabled, 1: Enabled
Default Value
It differs according to the location.
Supplement/Memo CDS: Content Delivery System
8. Service Mode
716