Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 704 / 987

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > INSTALL
BIT-SVC 1 OFF/ON of Web service of E-RDS
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of Web service function of E-RDS.
When OFF is selected, authentication information cannot be obtained from E-RDS.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 1
NFC-USE 1 ON/OFF of NFC option
Detail To set whether to enable the installed NFC option.
Set 1 when using the NFC option. [Use NFC Card Emulation] is displayed in [Settings/Registration].
Use Case
When installing the NFC option
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
0
Additional Functions
Mode
Management Settings> Device Management> Use NFC Card Emulation
BLE-USE 1 ON/OFF of BLE module option
Detail To set whether to enable the installed BLE module option.
Set 1 when using the BLE module option. The BLE setting screen is displayed in [Settings/
Registration].
Use Case When installing the BLE module option
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not set 1 when the BLE module option is not installed.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
■ CCD
COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > CCD
DF-WLVL1 1 White level adj in book mode: color
Detail To adjust the white level for copyboard scanning automatically by setting the paper which is usually
used by the user on the Copyboard Glass.
Use Case - When replacing the Copyboard Glass
- When replacing the Scanner Unit (Front)
- When replacing the Reader Controller PCB/clearing RAM data
Adj/Set/Operate Method 1) Set a paper on the Copyboard Glass.
2) Select the item, and then press OK key.
Caution Be sure to execute DF-WLVL2 in a row.
Display/Adj/Set Range During operation: ACTIVE, When operation finished normally: OK!
Related Service Mode COPIER> FUNCTION> CCD> DF-WLVL2
8. Service Mode
693