Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 666 / 987

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > COLOR
PM-OFS-M 2 Adj M-clr mid dens area clr balance: PDL
Detail To adjust the color balance of the medium density area of M-color at PDL print.
As the value is larger, the image gets darker.
In case of data generated by the printer driver and stored in Mail Box, a value obtained by adding
the value adjusted in [Fine Adjust Density] in [Access Stored Files] to the setting value of this item
is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range -8 to 8
Default Value 0
Additional Functions
Mode
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
PM-OFS-C 2 Adj C-clr mid dens area clr balance: PDL
Detail To adjust the color balance of the medium density area of C-color at PDL print.
As the value is larger, the image gets darker.
In case of data generated by the printer driver and stored in Mail Box, a value obtained by adding
the value adjusted in [Fine Adjust Density] in [Access Stored Files] to the setting value of this item
is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".
Adj/Set/Operate Method
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
-8 to 8
Default Value
0
Additional Functions
Mode
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
PM-OFS-K 2 Adj Bk-clr mid dens area clr balance:PDL
Detail To adjust the color balance of the medium density area of Bk-color at PDL print.
As the value is larger, the image gets darker.
In case of data generated by the printer driver and stored in Mail Box, a value obtained by adding
the value adjusted in [Fine Adjust Density] in [Access Stored Files] to the setting value of this item
is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range -8 to 8
Default Value 0
Additional Functions
Mode
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
8. Service Mode
655