
E732-0023-04
Communication error
Detection Description
DDI-S communication error (SPRDY-S detection error)
Remedy
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (UN81/J4001,
4002)
- READER ADF UNIT
- Main Controller PCB (UN81)
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
E732-0F01-04
Communication error
Detection Description
Communication error that can be recovered by reboot
If it is detected again immediately after reboot, E732-0001 is generated.
Remedy
It is not necessary to perform a remedy because the machine is automatically rebooted after log
collection.
E732-0F20-00
Communication error
Detection Description
Communication error that can be recovered by reboot
If it is detected again immediately after reboot, E732-0020 is generated.
Remedy
It is not necessary to perform a remedy because the machine is automatically rebooted after log
collection.
E732-0F21-00
Communication error
Detection Description
Communication error that can be recovered by reboot
If it is detected again immediately after reboot, E732-0021 is generated.
Remedy
It is not necessary to perform a remedy because the machine is automatically rebooted after log
collection.
E732-0F22-00
Communication error
Detection Description
Communication error that can be recovered by reboot
If it is detected again immediately after reboot, E732-0022 is generated.
Remedy
It is not necessary to perform a remedy because the machine is automatically rebooted after log
collection.
E732-0F23-04
Communication error
Detection Description
Communication error that can be recovered by reboot
If it is detected again immediately after reboot, E732-0023 is generated.
Remedy
It is not necessary to perform a remedy because the machine is automatically rebooted after log
collection.
E733-0000-05
Printer communication error
Detection Description
A communication error between the DC Controller PCB and the Main Controller PCB was detected
at startup.
Remedy
[Related parts] R1.00
- Harnesses between the DC Controller PCB (UN04/J112) and the Main Controller PCB (UN81/
J4511)
- DC Controller PCB (UN04)
- Main Controller PCB (UN81)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
7. Error/Jam/Alarm
447
Summary of Contents for imageRUNNER ADVANCE C255 Series
