Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 748 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > DSPLY-SW
PCMP-DSP 1 Set copy cmpl scrn dspl:chg w/devc alone
Detail To set whether to display the screen indicating completion of copying at the time of charging with
a device alone.
When 0 is set, a message "Copying is complete. Do you want to start the job again with the same
settings?" is not displayed in a pop-up screen.
When COIN is 4, this setting is enabled.
Use Case Upon user's request
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 1
Related Service Mode COPIER> OPTION> ACC> COIN
FIX-WRN1 1 [Reserve]
■ NETWORK
COPIER (Service mode for copier) > OPTION (Specification setting mode) > NETWORK
IFAX-LIM 2 No. of max print lines at IFAX reception
Detail To set the maximum number of lines for e-mail text to be printed when receiving IFAX.
Setting of this item can prevent endless printing of the attached file data in the case of receiving
an error e-mail or failure in interpretation of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail text without attached file.
Use Case When preventing endless print in the case of failure in reception
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 999
0: E-mail text not printed, 999: Unlimited
Default Value 500
SMTPTXPN 2 Setting of SMTP TX port number
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP transmission port number.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 65535
Default Value
25
SMTPRXPN 2 Setting of SMTP reception port number
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP reception port number.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 65535
Default Value 25
8. Service Mode
737