Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 714 / 987

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > CLEAR
JV-TYPE 1 Specification of MEAP cache clear target
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To specify the MEAP cache area to be cleared.
The target area is divided into the 4 parts:
- A jar file of MEAP application bundled as standard
- Data of the application mentioned above
- A jar file of MEAP application installed additionally
- Data of the application mentioned above
When JV-CACHE is executed, the area specified with this item is cleared.
For details, refer to the Service Manual.
Use Case When analyzing the cause of a problem due to MEAP application
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 4
0: Entire MEAP cache area
1: A jar file of MEAP application bundled as standard
2: A jar file and data of MEAP application bundled as standard
3: Data of MEAP application which has been installed additionally
4: A jar file and data of MEAP application which has been installed additionally
Related Service Mode COPIER> FUNCTION> CLEAR> JV-CACHE
Supplement/Memo MEAP applications bundled as standard: system application, built-in login application
MEAP applications installed additionally: non-Canon-made login application, general application,
etc.
CUSTOM2 2 [For customization]
■ MISC-R
COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > MISC-R
SCANLAMP 1 Lighting check of Scanner Unit (Frt) LED
Detail To light up the Scanning Lamp for 3 seconds under the White Plate and the Copyboard Glass
respectively.
Use Case When replacing the LED of the Scanner Unit
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range During operation: ACTIVE, When operation finished normally: OK!
SCANLMP2 1 Lighting check of Scanner Unit (Bck) LED
Detail To light up the LED of the Scanner Unit (Back) for 3 sec.
Check whether there is a missing block or no lighting in LED.
Use Case When replacing the LED of the Scanner Unit
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
During operation: ACTIVE, When operation finished normally: OK!
SCAN-ON 1 Execution of copyboard reading operation
Detail To execute the reading operation with the Copyboard.
Use Case When checking the operation of the motor of the Reader
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range During operation: ACTIVE, When operation finished normally: OK!
8. Service Mode
703