Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 745 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > DSPLY-SW
CLN-SEL 1 Set of condensation prev main unit clean
Detail To set the effect of cleaning inside the main unit for condensation prevention.
When 0 is set, cleaning inside the main unit is not executed.
When 1 to 3 is set, an item for condensation prevention is displayed in Settings/Registration, and
the level of effect of cleaning inside the main unit can be set.
As the value is larger, the effect is increased because ITB cleaning is executed more frequently,
but toner consumption and cleaning time are increased.
In the case of installation in a low temperature and high humidity environment (in winter), ask for
the user's opinion and configure the setting.
Use Case When condensation occurs in a low temperature and high humidity environment
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 3
0: OFF
1: ON (small effect, low toner consumption)
2: ON (moderate effect, moderate toner consumption)
3: ON (large effect, high toner consumption)
Default Value 0
SDTM-DSP 1 Display/hide of auto shutdown time
Detail To set whether to display "Auto Shutdown Time" in Settings/Registration menu.
Use Case
Upon user's request
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
When "Hide" is set, auto shutdown time is reset. (Auto shutdown is not performed.)
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value
It differs according to the location.
Additional Functions
Mode
Preferences> Time/Energy Settings> Auto Shutdown Time
WT-WARN 1 Dspl/hide of Wst Tonr Cntner prep mssg
Detail To set whether to display the preparation warning message of the Waste Toner Container on the
status area of LUI.
Use Case When there is no need to notify the preparation timing of the Waste Toner Container to the user
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Hide, 1: Display
Default Value 1
DF-DSP 1 ON/OFF ADF Maintenance Kit cntr ini scrn
Detail To set whether to display "ADF Maintenance Kit" on the counter initialization screen in [Settings/
Registration].
Use Case When the user does not replace the parts
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: Hide, 1: Display
Default Value 1
Additional Functions
Mode
Adjustment/Maintenance> Maintenance> Initialize After Replacing Parts> ADF Maintenance Kit
8. Service Mode
734