Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 730 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
AMSOFFSW 1 Enabling of AMS mode
Detail To enable the AMS mode.
When 0 is set, the AMS mode is enabled. The AMS mode is automatically enabled when the
following 2 conditions are satisfied.
- AMS license for an iR option is installed.
- AMS-supported Login application (User Authentication, etc.) is activated.
Use Case When enabling AMS mode
Adj/Set/Operate Method 1) Check that AMS-supported Login application is activated.
2) Enter 0, and then press OK key.
3) Turn OFF/ON the main power switch.
4) Check that [Role Management] is displayed on remote UI.
Display/Adj/Set Range 0 to 1
0: AMS mode enabled, 1: AMS mode disabled
Default Value 1
Related Service Mode COPIER> OPTION> LCNS-TR> ST-AMS
Additional Functions
Mode
(Remote UI) User Management> Authentication Management> Role Management
Supplement/Memo AMS: Access Management System
In AMS mode, [Role Management] is displayed on remote UI.
DMAX-DAY 1 Set D-max control execution frequency
Detail To set the frequency of D-max control that is executed after a specified number of sheets is fed.
When 0 is set, the execution frequency of D-max control is decreased by half.
Use Case When density varies at the time of making a large number of outputs
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Half, 1: Normal
Default Value 1
UA-OFFSW 1 ON/OFF of unified auth function
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of the Unified Authentication function.
Set 0 when not preferring to use the Unified Authentication function because of security concern.
Use Case
Upon user's request (not to use the Unified Authentication function)
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: ON, 1: OFF
Default Value
0
Supplement/Memo Unified Authentication: A function with which it is considered that login authentication under it is
performed by logging in it using SSO-H.
8. Service Mode
719