manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 462 / 987

Share
Download
Canon imageRUNNER ADVANCE C255 Series Service Manual Download Page 462

E746-0035-00

TPM version error

Detection Description

TPM PCB which cannot be used in this machine was installed.

Remedy

Install the TPM PCB for this model.

E748-2000-00

Main Controller PCB access error

Detection Description

Main Controller PCB Chip access error.

Remedy

Check/replace the Main Controller PCB (UN81)

E748-2001-00

Main Controller PCB access error

Detection Description

Main Controller PCB memory access error.

Remedy

Check/replace the Main Controller PCB (UN81)

E748-2010-00

Flash PCB error / HDD error

Detection Description

IPL (startup program) was not found, or the HDD could not be recognized.

Remedy

[Related parts] R1.00
- Harness between the Main Controller PCB (UN81/J6003, J6004) and the HDD
- HDD
- Flash PCB (UN91)
- Main Controller PCB (UN81)
[Remedy] Perform the following in the order while checking whether the error is cleared.
- Disconnect the cable between the Main Controller PCB and the HDD, and turn ON the main
power.
a. When the error code has not been changed:
1. Obtain the necessary backup data by referring to the backup data list.
2. Enter safe mode using (2+8) startup, and execute [4] Clear/Format> [2] Flash Format (Flash
format) using a USB flash drive..
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.
4. Restore the backup data.
b. When the error code has been changed to another one, see the remedy for the corresponding
code.
[Reference] For backup and restoration, refer to "Adjustment> Main Controller System" and
"Appendix> Backup Data List" in the Service Manual.

E748-2011-00

Flash PCB error

Detection Description

OS was not found at startup.

Remedy

After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E748-2012-00

Flash PCB error

Detection Description

Cannot mount the OS in safe mode startup or No OS startup script

Remedy

After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E748-2021-00

Main Controller PCB access error

Detection Description

Main controller board access errors

Remedy

Check/replace the Main Controller PCB (UN81)

E748-2023-00

Main Controller PCB access error

Detection Description

Main controller board access errors

Remedy

Check/replace the Main Controller PCB (UN81)

E748-2024-00

Main Controller PCB access error

Detection Description

Main controller board access errors

Remedy

Check/replace the Main Controller PCB (UN81)

E748-2025-00

Main Controller PCB access error

Detection Description

Main controller board access errors

Remedy

Check/replace the Main Controller PCB (UN81)

7. Error/Jam/Alarm

451

Summary of Contents for imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments