Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 784 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > CUSTOM
ABK-TOOL 1 Allow access from address book mntc tool
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to accept import from the address book maintenance tool.
Use Case When executing import from the address book maintenance tool
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Disabled, 1: Enabled
Default Value 0
Supplement/Memo Address book maintenance tool: Tool provided from CMJ.
FAN-ROT 2 Setting of fan control at condensation
Detail To set fan control when condensation occurs.
When 1 is set, fan control is switched according to the temperature.
Use Case
When condensation occurs
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 2
0: Normal, 1: Condensation prevention mode, 2: Not used
Default Value
0
DEV-SP1 2 Device special settings 1
Detail To execute the device special settings 1.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from the Quality Support Division.
Display/Adj/Set Range 00000000 to 11111111
Default Value 00000000
DEV-SP2 2 Device special settings 2
Detail To execute the device special settings 2.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Change the setting value in accordance with the instructions from the Quality Support Division.
Display/Adj/Set Range
00000000 to 11111111
Default Value
00000000
DEV-SP3 2 Device special settings 3
Detail To execute the device special settings 3.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from the Quality Support Division.
Display/Adj/Set Range 00000000 to 11111111
Default Value 00000000
DEV-SP4 2 Device special settings 4
Detail To execute the device special settings 4.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from the Quality Support Division.
Display/Adj/Set Range 00000000 to 11111111
Default Value
00000000
8. Service Mode
773