Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 797 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
DFLT-BOX 1 Setting of color mode for Mail Box scan
Detail To set the default color mode for Mail Box scan operation.
To reflect the change, it is necessary to initialize the default settings of scan and store function in
the screen displayed by pressing [Scan] in the main menu with one of the following methods.
- Settings/Registration> Function Settings> Store/Access Files> Common Settings> Scan and
Store Settings/Access Stored Files Settings> Change Default Settings> Initialize
- Logo icon in upper right of the screen> Change Default Settings> Initialize
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Initialize the default settings of scan and store function.
Caution Be sure to initialize the default settings of scan and store function after change.
Display/Adj/Set Range 0 to 2
0: Based on Auto/ACS settings, 1: Color mode, 2: Black mode
Default Value 0
Additional Functions
Mode
Main Menu> Scan and Store> Mail Box> (Box number)> Scan
Function Settings> Store/Access Files> Common Settings> Scan and Store Settings/Access
Stored Files Settings> Change Default Settings> Initialize
DPT-ID-7 2 Password entry set at dept ID reg/auth
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to require a password entry at the time of registration/authentication of department
ID.
With the setting to require entry, entry of 7-digit password is required as well as entry of department
ID.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Department ID only, 1: 7-digit (password) entry
Default Value 0
RUI-RJT 2 Connct set at invalid auth from remoteUI
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set to disconnect HTTP port when the machine receives invalid authentication from remote UI
3 times.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Continued connection, 1: Disconnected
Default Value 0
SND-RATE 2 Set compress ratio at SEND high compress
Detail To set the compression ratio when the data compression ratio for SEND (transmission) is set to
"High Rati".
As the value is larger, the compression ratio is higher (the file size becomes small).
Use Case
When making the transmission file size smaller
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
As the value is larger, image quality is decreased.
Display/Adj/Set Range
0 to 2
0: Compression ratio 1/16, 1: Compression ratio 1/20, 2: Compression ratio 1/24
Default Value
0
Additional Functions
Mode
Function Settings> Send> Common Settings> Data Compression Ratio
8. Service Mode
786