Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 717 / 987

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > MISC-P
TNRB-PRT 1 Output of Toner Container ID report
Detail To output the ID of the Toner Container in the form of a report.
Text data is saved in HDD as a file (TNRB-PRT-RPT.TXT).
Use Case When checking the ID of the Toner Container
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range ASCII character string (12 digits)
Related Service Mode COPIER> FUNCTION> MISC-P> RPT-FILE
FX-RG-H 2 Exe of ppr side rgst displace check mode
Detail To execute the mode to check side registration displacement of paper based on the position at the
Fixing Assembly.
By executing this item, a paper is picked up from the paper source specified by FX-RGPOS and
it stops at the position where a specified length of it comes out from the Fixing Assembly.
Adjust the paper position at pickup side (inside a cassette) based on the side registration position
at that time.
Use Case
When feeding speed of A4 size paper is decreased
Adj/Set/Operate Method
1) Specify a paper source by FX-RGPOS.
2) Select the item, and then press OK key.
A paper stops at the Fixing Assembly.
3) Turn OFF the main power switch.
4) Remove the Fixing Assembly, and check the side registration position of the paper.
5) Pull out the paper, and install the Fixing Assembly.
6) Turn ON the main power switch.
7) Enter 0, and then press OK key.
8) Execute mechanical adjustment using the Adjustment Plate in a cassette to adjust the side
registration position of paper.
9) Repeat the above procedure as needed.
Caution
Be sure to set A4 paper on the paper source (Cassette 1 to 4, Multi-purpose Tray) specified by
FX-RGPOS.
Related Service Mode
COPIER> FUNCTION> MISC-P> FX-RGPOS
FX-RGPOS 2 Spec ppr src at side reg displc ppr chck
Detail To specify the paper source that is used for checking side registration displacement of paper.
After setting A4R paper on the specified paper source, execute COPIER> FUNCTION> MISC-P>
FX-RG-H.
Use Case When feeding speed of A4 size paper is decreased
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution Be sure to set A4 paper on the specified paper source.
Display/Adj/Set Range 1 to 5
1: Cassette 1, 2: Cassette 2, 3: Cassette 3, 4: Cassette 4, 5: Multi-purpose Tray
Related Service Mode COPIER> FUNCTION> MISC-P> FX-RG-H
OPF-DSEQ 2 Set of DADF pickup noise reduction
Detail To set whether to control drive noise that is generated when picking up paper (plain paper, thin
paper, etc.) from DADF at 1/1 speed.
When 1 is set, noise is alleviated, but productivity is decreased (A4R, 35 ppm -> 32.2 ppm).
The setting is not applied to pickup at 1/2 speed (heavy paper).
Use Case Upon user's request (to alleviate noise)
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
8. Service Mode
706