manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 371 / 987

Share
Download
Canon imageRUNNER ADVANCE C255 Series Service Manual Download Page 371

[ [ [ [ [ [ [ [  Root Menu  (USB) <v14.06>  ] ] ] ] ] ] ] ]  (v14.06)
-------------------------------------------------------
  [ 1 ] : SYSTEM  Version

  [ 4 ] : Clear/Format
  [ 5 ] : Backup/Restore
  [ 8 ] : Download File

  [ 9 ] : Version Information
  [ Reset ] : Start shutdown sequence

3. [Download File Menu] will appear. Press [1] on the Numeric Keypad.

[ [ [ [ [ [ [ [  Download File Menu  (USB) <v14.06>  ] ] ] ] ] ] ] ]  (v14.06)
-------------------------------------------------------
  [ 1 ] : SUBLOG Download
  [ 4 ] : ServicePrint Download
  [ 5 ] : NetCap Download
  [ C ] : Return to Menu

4. Check the files to be downloaded and the number of files that are displayed, and press [0] on the Numeric Keypad.

[ [ [ [ [ [ [ [  Sublog Download (Ev CuntinuousLog  ] ] ] ] ] ] ] ]  
-----------------------------------------------------------------------------------------

Event Logs ( lastest 10 files) :
        20161010_14-00--V_exception
ContinuousLog :
       Period        :    20161012_0521-15 to 20161013_1733-36
Toral     :     102files
/ Execute ? /
-(OK) :  0   /   (CANCEL)   :  Any other keys -

● Saving to a PC with SST installed

Follow the procedure shown below to save (collect) Sublogs to a PC using SST.
If a USB device is used to save (collect) Sublogs, this work is not necessary.

1. Connect a PC with SST installed to the network where the host machine is connected.

2. Start SST, and select the model name of the machine from Model List. Press the Start button.

3. Click [Upload Data].

6. Troubleshooting

360

Summary of Contents for imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments