Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 726 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
PSWD-SW 1 Password type set to enter service mode
Detail To set the type of password that is required to enter when getting into service mode.
2 types are available: one for "service technician" and the other for "system adminis service
technician".
When selecting the type for "system adminis service technician", enter the password for
service technician after the password entry by the user's system administrator.
Use Case Upon request from the user who concerns security
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 2
0: No password, 1: Service technician, 2: System adminis service technician
Default Value 0
SM-PSWD 2 Password setting for service technician
Detail To set password for service technician that is used when getting into service mode.
Use Case
When password is required to get into service mode
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Be sure to select 1 or 2 with PSWD-SW in advance.
Display/Adj/Set Range
1 to 99999999
Default Value
11111111
Related Service Mode COPIER> OPTION> FNC-SW> PSWD-SW
RPT2SIDE 1 Set of report 1-sided/2-sided output
Detail To set whether to use 1-sided or 2-sided for report output of service mode.
Use Case When making 1-sided report output
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: 1-sided, 1: 2-sided
Default Value 1
Related Service Mode COPIER> FUNCTION> MISC-P> P-PRINT
INVALPDL 1 Disable of PDL license
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To disable the registered PDL license.
When "1: Disabled" is set, PDL is disabled even if a PDL license is registered. This is set to the
machines installed at convenience stores, which do not allow PDL to be used.
Use Case
When prohibiting the use of PDL
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Registered PDL license is enabled, 1: Disabled
Default Value
0
8. Service Mode
715