manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 413 / 987

Share
Download
Canon imageRUNNER ADVANCE C255 Series Service Manual Download Page 413

E197-0000-05

Communication error

Detection Description

Although access to KONA1 (ASIC) in the DC Controller PCB from the DC Controller PCB (CPU)
was performed, the NACK (a negative reply sent by the reception side to the sending side) was
received for 2 times.

Remedy

[Remedy] Check/replace the DC Controller PCB (UN04).
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

E197-0101-05

Communication error

Detection Description

Timeout error was detected at load control ASIC communication. (KONA1)

Remedy

[Remedy] Check/replace the DC Controller PCB (UN04).
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

E197-0F00-05

Communication error

Detection Description

Although access to KONA1 (ASIC) in the DC Controller PCB from the DC Controller PCB (CPU)
was performed, no response was received and timeout occurred.

Remedy

[Remedy] Check/replace the DC Controller PCB (UN04).
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

E197-1000-05

Communication error

Detection Description

Although access to KONA2 (ASIC) in the DC Controller PCB from the DC Controller PCB (CPU)
was performed, the NACK (a negative reply sent by the reception side to the sending side) was
received for 2 times.

Remedy

[Remedy] Check/replace the DC Controller PCB (UN04).
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

E197-1101-05

Communication error

Detection Description

Timeout error was detected at load control ASIC communication. (KONA2)

Remedy

[Remedy] Check/replace the DC Controller PCB (UN04).
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

E197-1F00-05

Communication error

Detection Description

Although access to KONA2 (ASIC) in the DC Controller PCB from the DC Controller PCB (CPU)
was performed, no response was received and timeout occurred.

Remedy

[Remedy] Check/replace the DC Controller PCB (UN04).
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

7. Error/Jam/Alarm

402

Summary of Contents for imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments