Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 803 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
IFAX-OF 1 IFAX send prohibition to entered address
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set to prohibit address entry at the time of I-Fax transmission.
IFAX transmission is not available by entering the address because of no display of "I-Fax" on the
transmission screen.
The addresses already registered in the Address Book can be used.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete them because the addresses
registered in the Address Book can be used.
Display/Adj/Set Range 0 to 1
0: Enabled, 1: Disabled
Default Value 0
LDAP-DEF 1 Initial condtn set of LDAP server search
Detail To set initial condition for search target attribute that is specified at the time of LDAP server Details
search.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5: No registration 1 (any setting),
6: No registration 2 (any setting)
Default Value
0
Related Service Mode COPIER> OPTION> USER> LDAP-SW
FREE-DSP 2 Display/hide of charge disable screen
Detail To set whether to display or hide the Use Charge Management screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily releasing the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the Use Charge Management screen in Settings/Registration.
Use Case When enabling all the services to be provided for free by temporarily releasing the charging system
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Hide, 1: Display
Default Value 0
Additional Functions
Mode
Management Settings> Charge Management> Use Charge Management
TNRB-SW 2 Display/hide of Toner Container counter
Detail To set whether to display the Toner Container counter on the Counter Check screen.
Use Case When not showing the screen to users
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Hide, 1: Display (Toner Container counter 70s), 2: Not used, 3: Display (Toner Container counter
70s and 180s)
Default Value It differs according to the location.
8. Service Mode
792