Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 724 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
FXWRNLVL 2 Set Fix Film life display threshold VL
Detail To set the threshold value to display the life of Fixing Film.
This item is enabled when the value at the following is set to "1" (default: 0): COPIER> OPTION>
DSPLY-SW> FXMSG-SW (ON/OFF of Fixing Assembly replacement message)
The life judgment counter is stored in the DC Controller. It is not possible to change or check the
counter value.
Use Case When preventing the occurrence of fixing failure caused by the continuous use of the Fixing Film
beyond its life
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Warning is hidden.
1: Warning is displayed when the life counter reaches the specified value.
2. Warning is displayed when the print counter reaches the specified value.
3: Warning is displayed when either the life counter or the print counter reaches the specified value.
Default Value 0
Related Service Mode COPIER> OPTION> DSPLY-SW> FXMSG-SW
KSIZE-SW 2 ON/OFF of Chinese paper (K-size) display
Detail To set whether to display Chinese paper (K-size paper: 16K) as an original size at the time of
copying or scan and store.
When MODEL-SZ is 0, this setting is enabled.
Use Case
When using K size paper
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
It differs according to the location.
Related Service Mode COPIER> OPTION> FNC-SW> MODEL-SZ
Supplement/Memo 16K paper: 270 x 195 mm
PDF-RDCT 2 PDF reduction set at forwarding
Detail To set whether to reduce the image for transmission when converting the image received by IFAX
into PDF for e-mail/file transmission.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Following the current setting, 1: Image reduction
Default Value 0
SJB-UNW 2 Reserve upper limit of secured print job
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the upper limit for the number of reserved jobs in secured print job.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 2
0: 50 jobs, 1: 90 jobs, 2: No limit
Default Value
1
8. Service Mode
713