Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 783 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-FIX
TMP-TB17 1 Fixing control temperature: Rcycl ppr 3
Detail To set the offset of fixing control temperature for recycled paper 3 (91 to 105 g/m2).
As the value is incremented by 1, the control temperature is increased by 5 deg C from the specified
value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use Case When offset/fixing failure occurs on recycled paper 3
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image failure occurs when setting
an extreme value.
Display/Adj/Set Range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default Value 0
Amount of Change per
Unit
5
■ CUSTOM
COPIER (Service mode for copier) > OPTION (Specification setting mode) > CUSTOM
TEMP-TBL 1 Fixing control temperature:Plain paper 1
Detail To set the offset of fixing control temperature for plain paper 1 (60 to 75 g/m2).
As the value is incremented by 1, the control temperature is increased by 5 deg C.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use Case When offset/fixing failure occurs on plain paper 1
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image failure occurs when setting
an extreme value.
Display/Adj/Set Range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default Value 0
Amount of Change per
Unit
5
SCANTYPE 1 [Not used]
PDLEVCT1 2 Set event skipping at continuous PDL job
Detail To set event skipping at continuous PDL job.
During continuous operation, processing performance may be decreased due to other events
generated by the event in operation. In this case, decrease of processing performance can be
prevented by skipping the amount of event.
Processing performance: No event skipping < Subject of skipping 1
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: No event skipping, 1: Subject of skipping 1
Default Value 1
8. Service Mode
772