Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 711 / 987

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > CLEAR
CNT-MCON 1 Clear of Main Controller service counter
Detail To clear the service counter counted by the Main Controller PCB.
Use Case When clearing the service counter counted by the Main Controller PCB
Adj/Set/Operate Method Select the item, and then press OK key.
Related Service Mode COPIER> COUNTER
Supplement/Memo See COUNTER for the target counter.
CNT-DCON 1 Clear of DC Controller service counter
Detail To clear the service counter counted by the DC Controller PCB.
Use Case
When clearing the service counter counted by the DC Controller PCB
Adj/Set/Operate Method
Select the item, and then press OK key.
MMI 1 Clear Settings/Registration setting VL
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the Settings/Registration setting values.
- Preferences (excluding values for Paper Type Management Settings)
- Adjustment/Maintenance
- Function Settings
- Set Destination (excluding Address Lists)
- Management Settings (excluding Department ID Management)
Use Case When clearing various setting values of Settings/Registration
Adj/Set/Operate Method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - The setting value is cleared after the main power switch is turned OFF/ON.
- If this item is executed while a login application other than User Authentication is running, it
switched to User Authentication after reboot. Set the login application using SMS as needed.
MN-CON 1 Deletion of setting values
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To delete the setting values of address lists, forwarding settings, Settings/Registration and service
mode.
For details, refer to "Backup Data List" in the Service Manual.
Use Case When initializing the setting values
Adj/Set/Operate Method 1) Select the item, and then press OK key.
The machine is automatically rebooted.
2) Turn OFF/ON the main power switch.
Caution - Output the service mode setting values by P-PRINT before execution. After execution, enter
necessary setting value.
- RAM data is cleared after the main power switch is turned OFF/ON.
Related Service Mode COPIER> FUNCTION> MISC-P> P-PRINT
CARD 1 Clear of card ID-related data
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the data related to the card ID (department).
Use Case
When clearing the data related to the card ID
Adj/Set/Operate Method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The value is cleared after the main power switch is turned OFF/ON.
ALARM 1 Clear of alarm log
Detail To clear alarm log.
Use Case When clearing alarm log
Adj/Set/Operate Method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The alarm log is cleared after the main power switch is turned OFF/ON.
8. Service Mode
700