Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 703 / 987

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > INSTALL
CNT-DATE 1 Set counter send start date to SC server
Detail To set the year, month, date, hour and minute to send counter information to the sales company's
server.
This is displayed only when the Embedded-RDS third-party extended function is available.
Use Case When the Embedded-RDS third-party expanded function is available
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range YYYYMMDDHHMM (12 digits)
YYYY: Year, MM: Month, DD: Date, HH: Hour, MM: Minute
Default Value 000000000000
Supplement/Memo Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
CNT-INTV 1 Set counter send interval to SC server
Detail To set the interval of sending counter information to the sales company's server in a unit of one
hour.
This is displayed only when the Embedded-RDS third-party extended function is available.
Use Case
When using the Embedded-RDS third-party extended function
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
1 to 168 (=1 week)
Unit
hour
Default Value 24
Supplement/Memo Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
Amount of Change per
Unit
1
CDS-CTL 1 Set country/area when using CDS
Detail To set country/area to enable CDS.
Use Case When enabling CDS
Adj/Set/Operate Method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range Country/area set in COPIER> OPTION> FNC-SW> CONFIG, CA (Canada), LA (Latin America)
and HK (Hong Kong)
Default Value
It differs according to the location.
Related Service Mode
COPIER> OPTION> FNC-SW> CONFIG
Supplement/Memo
CDS: Contents Delivery System
RDSHDPOS 1 Auto adj of Reader shading position
Detail To automatically adjust the Scanner Unit (Front) position in feed direction when reading the White
Plate on the left edge of the Copyboard Glass.
The adjustment result is reflected to ADJ-S.
Use Case When replacing the Scanner Unit (Front)
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range At start of operation: START, During operation: ACTIVE, When operation finished normally: OK!
Required Time 10 sec
Related Service Mode COPIER> ADJUST> ADJ-XY> ADJ-S
Supplement/Memo Shading: It determines the white color reference by reading the White Plate.
8. Service Mode
692