Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 774 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-FIX
FX-S-TMP 1 Image leading edge control temp: pln 1
Detail To set the offset of image leading edge control temperature for plain paper 1 (60 to 75 g/m2).
As the value is incremented by 1, the control temperature is increased by 5 deg C from the specified
value.
Increase the value when a fixing failure occurs on the leading edge of paper.
Decrease the value when uneven gloss occurs on the leading edge (56.5 mm).
Use Case When uneven gloss occurs on the leading edge (56.5 mm) of plain paper 1
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image failure occurs when setting
an extreme value.
Display/Adj/Set Range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: 5 deg C, 2: 10 deg C
Unit deg C
Default Value 0
Amount of Change per
Unit
5
TMP-TBL2 1 Fixing control temperature:Heavy paper 1
Detail To set the offset of fixing control temperature for heavy paper 1 (106 to 128 g/m2).
As the value is incremented by 1, the control temperature is increased by 5 deg C from the specified
value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use Case When offset/fixing failure occurs on heavy paper 1
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image failure occurs when setting
an extreme value.
Display/Adj/Set Range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default Value 0
Amount of Change per
Unit
5
TMP-TBL3 1 Set fixing control temp: heavy paper 2/3
Detail To set the offset of fixing control temperature for heavy paper 2, 3 (129 to 163 g/m2).
As the value is incremented by 1, the control temperature is increased by 5 deg C from the specified
value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use Case
When offset/fixing failure occurs on heavy paper 2, 3
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image failure occurs when setting
an extreme value.
Display/Adj/Set Range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default Value 0
Amount of Change per
Unit
5
8. Service Mode
763