Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 757 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > NETWORK
SIPAUDIO 2 Set of SIP session establishment order
Detail To set whether to establish audio session or T.38 session first with SIP.
Usually, audio session followed by T.38 session is established when using IPFAX in an intranet
environment. However, this order is not specified by the standard.
Set 1 when connecting the SIP server or terminal where the session starts with T.38 session.
Use Case When connecting the SIP server or terminal where the session starts with T.38 session
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution When 1 is set, IPFAX fails with the destination where the session starts with audio session.
Display/Adj/Set Range 0 to 1
0: audio, 1: T.38
Default Value 0
Supplement/Memo SIP: Session Initiation Protocol
SIPINOUT 2 Set of internal/external number to URI
Detail To set whether to store the external number or the internal number in From URI when using NGN.
Use Case
When a call cannot be made with external number while using NGN
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: External number, 1: Internal number
Default Value 0
Supplement/Memo NGN: Next Generation Network
URI: Uniform Resource Identifier
SIPREGPR 2 Setting of registrar server use protocol
Detail To set the protocol used for communication with registrar server.
Although the protocol that is the same as the one for proxy server is usually used, another protocol
can be used in accordance with user and environment.
Use Case Upon user's request (to use a protocol different from the one for proxy server)
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 3
0: Protocol set in Settings/Registration menu, 1: UDP, 2: TCP, 3: SSL
Default Value 0
Additional Functions
Mode
Preferences> Network> TCP/IP Settings> SIP Settings> Intranet Settings
PRCLTYPE 2 Setting of dedicated protocol type
Detail To set the type of dedicated protocol (CPCA protocol).
When 1 is set, only the commands where security has been improved are accepted, whereas
conventional commands are rejected.
Use Case Upon user's request (for customization)
- Job assignment from Print/Scan/Fax driver at department management
- AiRFAX transmission job assignment
- Setting/changing of system administrator function from a remote utility such as iWEMC
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With TYPE 1, compatibility with conventional drivers and iW products may be lost.
Display/Adj/Set Range 0 to 1
0: TYPE 0 (Compatible in a conventional manner), 1: TYPE 1
Default Value 0
8. Service Mode
746