Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 793 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
COUNTER6 1 Setting of software counter 6
Detail To set counter type for software counter 6 on the Counter Check screen.
Use Case Upon user/dealer's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 999
Default Value 0
DATE-DSP 2 Setting of data/time display format
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set date/time display format according to the country or region.
After the display format is set with this mode, the order of date is reflected to the followings:
Preferences > Timer/Energy Settings > Date/Time Settings, and report output.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
Default Value
It differs according to the location.
Additional Functions
Mode
Preferences> Timer/Energy Settings> Date/Time Settings
MB-CCV 2 Control card usage limit for Mail Box
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of control card for Mail Box.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Unlimited, 1: Limited
Default Value 1
CONTROL 1 Charge setting of PDL job
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set charge count transmission of PDL job to the connecting charging management device (Coin
Manager or non-Canon-made control card).
Use Case
Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: No charge, 1: Charge
Default Value 0
Related Service Mode COPIER> OPTION> ACC> COIN
CNT-DISP 2 Display/hide of serial No.
Detail To set whether to display or hide the serial No. on the Counter Check screen.
Use Case When setting to display/hide serial No. on the Counter Check screen.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Display, 1: Hide
Default Value 0
8. Service Mode
782