manualshive.com logo in svg

Canon Colorado 1630, Operation Manual

Share
Download
Canon Colorado 1630 Operation Manual Download Page 87

10.

Use both hands to turn the media roll backwards (1) until the media flap has passed the metal
paper guide.

11.

Use both hands to move the media forward and slide it under the metal paper guide (2) until the
media is transported automatically. You will hear a beeping sound when the media is correctly
fed and loaded.

IMPORTANT

Make sure media is always rolled up evenly on the core. Do not load media that is not
rolled up evenly (telescoping) as it can damage the machine.

When the printer does not take the media (no beeping sound), you can feed the media manually.
The manual feeding option is recommended for weak and difficult to load media, such as canvas
and textiles.
For manual feeding:

Load a media roll (position 1)

Chapter 4 - Handle the media

87

Summary of Contents for Colorado 1630





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands