Canon Colorado 1630, Operation Manual

Page: 74 / 388

Media setting Description
[Advance correc-
tion (Caldera) /
Step correction
(ONYX)] Controls the average step size for the selected media and print mode. Only
change this setting when media calibration, [Automatic advance correction],
and decreasing the vacuum settings do not help enough in improving the
print quality.
Decrease for smaller steps, in case of constant light lines (at the swath
boundary). Increase for larger steps, in case of constant dark lines. When
both light and dark lines are present, you cannot correct it via this setting.
NOTE
• The [Automatic advance correction] setting will still work when
you use [Advance correction/Step correction].
• The change of this setting is only applied to a job when the
queue is empty. Send jobs one by one to make sure that the
changes are applied
[Print strategy] If you are printing in Matte Specialty, you can select the monodirectional
strategy option. Monodirectional means that the engine prints and cures on-
ly in one direction.
[Optimized color
profiling] The [Optimized color profiling] level is set as part of the color profiling se-
quence. When the level is set to
1 , no color corrections are made. In case of
wrinkles, increase the [Optimized color profiling] in order to reduce the ink
limit in an optimized way. This will reduce the risk of wrinkles.
[Flood Fill
(Gloss)]
Only for FLXfinish
+
.
When this setting is checked and there is no gloss layer, the print is fully
Gloss.
When this setting is not checked and there is no gloss layer, the print is fully
Matte.
Print strategy selection
Default Default
Monodirectional
Strategy
(ONYX /
Caldera)
Ma
x S
p
ee
d
H
igh
Sp
ee
d
Spe
e
d
Pro
d
uct
io
n
H
igh
Qua
lity
Spe
ci
a
lty
H
igh
Sp
ee
d
Spe
e
d
Pro
d
uct
io
n
Q
u
a
lity
Spe
ci
a
lty
Backl
it
Backl
it
H
D
F
L
X
fi
n
ish
+
* * * * *
Print mode
Gloss Matte Mixed
b b a b b b b b b b b b b b
b
* For these print modes a "High Density" option is available in the media settings.
Risk for strategy b:
Zebra banding (varies left-right and from
swath to swath). This cannot occur for strat-
egies of type a.
Change the media settings
74 Chapter 4 - Handle the media