manualshive.com logo in svg

Canon Colorado 1630, Operation Manual

Share
Download
Canon Colorado 1630 Operation Manual Download Page 275

4.

Select [Enabled] and click on [OK].

5.

Click on the value next to [NTP server name]. A window opens.

6.

Fill in a valid IP address or domain name and click on [OK].
If you do not know the server name, ask your IT administrator.

7.

Click on [Start the test] next to [Test NTP server connection]. A windows opens.

8.

Click on [Start the test].

9.

Check that the result of the test is successful and click on [OK].
When the result is not successful, make sure the server name is correct. If you cannot solve the
problem, ask your IT administrator.

Configure time synchronization

Chapter 8 - Configure the network and security settings

275

Summary of Contents for Colorado 1630





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands