Biotek 405 LS, Operator'S Manual

Page: 12 / 240

x | 405 LS Operator's Manual
agglutination assays.
l
If the instrument has an "IVD" label it may be used for clinical and non-clinical purposes,
including research and development. If there is no such label the instrument may only be
used for research and development and non-clinical purposes.
Quality Control
It is considered good laboratory practice to run laboratory samples according to
instructions and specific recommendations included in the assay package insert for
the test to be conducted. Failure to conduct Quality Control checks could result in
erroneous test data.
Warranty and Product Registration
Please take a moment to review the Warranty information that shipped with your
product. Please also register your product with BioTek to ensure that you receive
important information and updates about the product(s) you have purchased.
You can register online through BioTek’s Customer Resource Center (CRC) at
www.biotek.com or by calling 888/451-5171 or 802/655-4740.
Repackaging and Shipping
If you need to ship the instrument to BioTek for service or repair, contact BioTek
for a Return Materials Authorization (RMA) number and use the original packing
materials. Other forms of commercially available packaging are not recommended
and can void the warranty. If the original packing materials have been damaged or
lost, contact BioTek for replacement packing.
Warnings
Operate the instrument on a level, stable surface away from excessive
humidity.
When operated in a safe environment, according to the instructions in this
document, there are no known hazards associated with the 405 LS. However,
the operator should be aware of certain situations that could result in serious
injury; these vary depending on the instrument type. See
Hazards and
Precautions .
Strict adherence to instrument maintenance and qualification procedures is
required to ensure accurate dispense volumes and risk-free operation.
405™ Microplate Washer LS